โครงการวิจัย
ศึกษาการชุบผิวแข็งของเหล็กกล้าคาร์บอนต่ำด้วยวิธีแพ็คคาร์บูไรซิ่งโดยใช้สารตัวเร่งที่แตกต่างกัน
Study of the Surface Hardening of Low Carbon Steel by Pack Carburizing with Various Energizers
รายละเอียดโครงการ
| ปีงบประมาณ | 2560 |
| หน่วยงานเจ้าของโครงการ | |
| ลักษณะโครงการ | โครงการใหม่ |
| ประเภทโครงการ | โครงการเดี่ยว |
| ประเภทงานวิจัย | |
| วันที่เริ่มโครงการวิจัย (พ.ศ.) | 1 มกราคม 2559 |
| วันที่สิ้นสุดโครงการวิจัย (พ.ศ.) | 1 มกราคม 2560 |
| วันที่ได้รับทุนวิจัย (พ.ศ.) | 1 มกราคม 2559 |
| ประเภททุนวิจัย | งบประมาณรายได้ |
| สถานะโครงการ | สิ้นสุดโครงการ(ส่งผลผลิตเรียบร้อยแล้ว) |
| เลขที่สัญญา | |
| เป็นโครงการวิจัยที่ใช้ในการจบการศึกษา | ไม่ใช่ |
| เป็นโครงการวิจัยรับใช้สังคม | ไม่ใช่ |
| บทคัดย่อโครงการ | The paper deals with some factors influencing microstructure and hardness properties of austempered SKD11. Final structure and properties of SKD11 are obtained by exactly controlled process of heat treatment of SKD11 steel. The influence of conditions of isothermal heat treatment on microstructure and hardness properties of austempered SKD11 steel, especially compare with conventional process and different holding time at this temperature, is shown in the paper. Some selected SKD11 steel samples were austempered in a salt bath (KNO3) at 325 C. All the test samples were then subjected to hardness tests and microscopic examination. Optimum hardness was found at holding times of 40 min. Keywords: austempering, SKD11, transformation holding time |
| รายละเอียดการนำไปใช้งาน | |
| เอกสาร Final Paper(s) |
|
ทีมวิจัย
| ที่ | นักวิจัย | หน่วยงาน | ตำแหน่งในทีม | การมีส่วนร่วม (%) |
|---|---|---|---|---|
| 1 | ผศ. พิชญา พิศสุวรรณ | คณะวิศวกรรมศาสตร์ ราชมงคลศรีวิชัย สงขลา | หัวหน้าโครงการ | 70 |
| 2 | ผศ. ปิยวิทย์ สุวรรณ | คณะวิศวกรรมศาสตร์ ราชมงคลศรีวิชัย สงขลา | ผู้ร่วมวิจัย | 30 |